After-Sales Service; Safety Instructions; Operating Limits - HellermannTyton SpotClip-I Manuel D'utilisation

Safety instructions

Standard EN 13501-1 A2 s1 d0 applies to insulation material and
vapour barriers. This standard corresponds to the earlier M0
classification. Only non-combustible insulation materials and
fire-retardant vapour barriers must be used, which in the event of fire,
do not emit fumes and do not form droplets.
1.3

After-Sales Service

If you have any questions, please contact the HellermannTyton
representative for your country. The contact details can be found on
the fold-out page.
2 Safety instructions
The product is manufactured in accordance with recognised safety
and technical regulations. However, in the event of incorrect use it
can affect the health and life of the operator or third parties, as well
as damage the product and other property. This operating manual
contains safety instructions.
f Please follow all the instructions to avoid personal injury and
damage to property and the environment.
2.1 Diagram and organisation of warning symbols
Warning symbols are organised as follows:
WArning
Type and source of danger!
Explanation of the type and source of danger.
f
Measures to prevent potential dangers.
A warning indicates a potential hazard to life or a risk of serious
injury.
2.2

Operating limits

f The installation environment must meet the following conditions:
• Suitable for the use of LED and fluorescent downlights.
5
Operating manual • SpotClip-I • 08-2016