Publicité
XFL3/4/5/6-LED
INSTALLATION INSTRUCTIONS
Adjustable optics:
XFL3/4/5/6 VDW (Wide) models: turn the slot [9] to adjust the beam distribution to 90°, 75°, or 55° [10];
XFL5/6 VDN (Narrow) models: turn the slot [9] to adjust beam distribution to 30°, 25°, or 20°.
(For XFL5/6)
XFL4/5/6
CCT, Lumen Select, Photocontrol:
1. Remove the screw caps to reveal either CCT & Wattage, CCT, Wattage, or Photocell (PC) control switches [11] [12]. As
standard, fixture is set to 4000K CCT and highest wattage, and Photocontrol is set to ON. Switches will differ for
different versions of the XFL.
Note: XFL3/4 uses DC Photocell, located behind the screw cap, while XFL5/6 uses AC Photocell.
PC
CCT &
Watt
XFL3
RAB Design Lighting inc.
Loosen to
adjust angle
[7]
PC
CCT &
Watt
XFL4
August– 2024
[8]
CCT &
Watt
XFL5
CCT
Watt
XF6
Page 2 of 6
Publicité
