Publicité
Monitoring Box
7.3.2 « Manager » page : FLOW
The "Flow Management" tab allows you to change the mode of operation of the inverter. Refer to the
annex "Mode of operation" for more information on different modes of operation.
7.3.3 « Manager » page: Battery
The "Battery Management" tab allows you to set up the battery bank. The setting varies depending on
the battery technology in use (Lead-Acid or Lithium).
7.3.3.1
Using a Lithium battery
Refer to the battery manufacturer's documentation if necessary.
1. To establish communication between the inverter and the battery, an
RJ45 connector wired as presented here should be made for the
inverter's end of the cable.
2. Select the battery from the list, then press "OK".
Installation_Manual_Monitoring_Box_
IMA-BOX
_VA.6
IMA-BOX
FR
EN
33
Publicité
