Publicité
C
Cleaning and maintenance
Problem
Display is not on
"
" is lighting
"
" is lighting
Dryer does not start
Degree of dryness was not
reached or drying time too
long
There are humming noises
The dryer switches off at the
end of the programme
Warning!
If you cannot deal with the problems by yourself and need
help:
• Press the "On/Off" button.
• Pull out the mains plug and call the service.
Solution
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme .
• Press the "On/Off" button.
• Check the water container. If it's full, please pour out
the condensate water and restart the dryer.
• If the container is not full, please restart the dryer
directly.
• If the "
" icon is still lighting after you have finished
the first two steps, please call the service.
• Clean the lint filter.
• Connect the tumble dryer to the mains.
• Turn on the tumble dryer.
• Check the the door is closed.
• Check the programme is set.
• Press the "Start/Pause" button.
• Clean lint filter and heat exchanger.
• Empty the water container.
• Check the drain hose.
• Check installation place is appropriate.
• Keep the air inlet clean.
• Use higher drying intensity level programme or time
programme.
• The compressor is operating. These noises are quite
normal and do not indicate a fault.
• The dryer switches off automatically for energy saving.
This is not an error but a normal function.
21
EN
Publicité
