Publicité
4-Operating modes
3 operating modes available :
1. automatic mode with master/slave function, pre-programmed effects
2. DMX mode - Controlled by a DMX controller
3. Sound mode: music detection
Automatic mode with Master/Slave function, pre-programmed effects.
In Master/Slave mode, the first device controls the subsequent devices. This mode is very
practical when you need a quick installation with immediate results.
The Robospot 60 defaults to "Master mode" if no DMX cable is connected to its DMX IN
input.
Similarly, the Robospot 60 is in "Slave" or "DMX mode" as soon as it receives a DMX signal
on its DMX IN input.
The Robospot 60 "Master" can be configured in "Simple" or "Audio" Automatic mode. (See
table opposite)
DMX mode
Press the "MENU" button, then select function "A001".
Use the "UP" and "DOWN" buttons to select the DMX address value you require.
15
Publicité
