Publicité
1. Initialisation and setting time
For its firt use, to charge the watch, orient the watch face so its pointing a light
source. If the watch is facing the sunlight or a artificial light (more than 1000 lux.),
it is going to work immediatly. The seconds hand may start moving at two-
second intervals. Let the watch exposed until it gets a regular one-second
interval.
To set the time, the crown manipulation has to be done on the back of the watch
case. Pull the crown up from position 1 to position 2 and wind it clokcwise or anti-
clockwise to put the hands at the good time. After setting is done, put the crown
back to its initial position (position 1).
Position 1
Position 2
Front
Back
Back
Publicité
