dji DL Serie Guide D'utilisateur page 8

V 1.2

DJI DL/DL-S LENS User Guide

Using the Lens

Filters

DJI offers the DL/DL-S lens protector and filters

specifications of the DL/DL-S lens protector and filters are shown below.

Filter/Protector

DJI DL/DL-S ND4 Filter

DJI DL/DL-S ND8 Filter

DJI DL/DL-S ND16 Filter

DJI DL/DL-S ND32 Filter

DJI DL/DL-S ND64 Filter

DJI DL/DL-S ND128 Filter

DJI DL/DL-S Lens Protector

* DJI DL 18mm F2.8 ASPH Lens and DJI DL 75mm F1.8 Lens only support filters with a diameter of 55

mm. Purchase third-party filters separately.

For optimal performance when shooting, the following combinations are recommended when

mounting the lens onto the gimbal camera:

a. Lens hood + lens protector

b. Lens hood + balancing ring

c. Lens hood + ND filter

d. Two ND filters

The total weight of each combination mentioned above should be between 10 to 35 g. It is

recommended to keep the total weight of the attached components around 20 g when the

gimbal is balancing to ensure optimal video recording performance.

• The gimbal performance is affected by the weight of the camera. Refer to the

requirements above to mount the lens protector, filter, and lens hood when using the

DL/DL-S lens.

• Third-party filters are supported for both DL/DL-S lenses. Make sure to use a filter with

a thickness of 4.4 mm and a total weight of 35 g (including the hood).

• The lens protector is only used to protect the lens during transportation, storage,

and use. It is recommended to use the protector in severe shooting environments to

prolong the service life of the lens. Be aware that there might be lens glare in some

situations when the protector is in use.

, which are available on the DJI online store. The

Diameter

46 mm

Weight

Approx. 9 g