Publicité
DJI DL/DL-S LENS User Guide
Installing the Lens
Installing the lens to Zenmuse X7
The following instructions use the DJI DL 24mm F2.8 LS ASPH lens as an example.
1. Remove the camera body cap.
2. Remove the lens cap and rear cap.
3. Align the two red dots on the camera body and the lens, and then insert the lens into the
camera body.
4. Rotate the lens clockwise until hearing a click. Rotate the lens counter-clockwise after
mounting to make sure it is firmly attached.
* DJI DL 18mm F2.8 ASPH Lens and DJI DL 75mm F1.8 Lens are not compatible with Zenmuse X7
gimbal camera.
2
©
2023 DJI All Rights Reserved.
1 1
1 3 3
*
2
1 4
Publicité
