Publicité
5. When choosing pot,repeat steps 3 and steps 4;
6. When the pot ① menu is selected well, not starting work, now, copy light
on, when
selecting pot ② , ① indicator is on,the corresponding display screen of the pot ① alternately
displays the menu temperature and time, sync light
on. Follow the same steps 3 and
steps 4 for pot ② selection, press the start pause button after selecting
， both pots enter
working mode at the same time,the display alternates the temperature time for each
menu; if pot ② is chosen well,also want to adjust the pot ①， press pot ① first, enter the pot
① adjustment mode adjustment, adjust and press the start button
， both pots enter
working mode at the same time ;
，
7. In machine work,press the start pause button
lamp, the corresponding menu light
and pot number light blink, other menu lights are on, machine heat suspension, fan delay
20 seconds stop, both pots are working, so pause them at the same time; if want to pause
the pot ①,need to select pot first after ① key, press the Start pause button again
pot ①
pause, to adjust, when the pause,the corresponding display alternately displays the
program temperature and time; the same goes for pot ② pause.
8. In machine work, hold down the power button
for 2 seconds, the machine gave a long
cry, both pots stop working at the same time,the display screen shows OFF, power light
on, all other lights go out; if want to tum off pot 1 or pot 2 separately, first choose the
corresponding ① or ② ， then press and hold the power button
for 2 seconds,
corresponding pot stop working,the corresponding display screen shows OFF;
9. Machine working state, if temperature adjustment is necessary, Choose ① or ② first, then
select the temperature and time selection keys respectively
adjust the temperature and
time,exit the debugging mode 5 seconds after adjustment without any operation;
10. Buzzer sound prompts,conventional key operation,short press short ring, long press long
ring;the program end buzzer has 5 sounds,the corresponding screen displays OFF,
corresponding light off, same not working mode;
11. After selecting pot ① or pot ②, Long press the corresponding ① or ② button to cancel.
12. Memory function: the machine has a memory function, such as the use of the machine
pot ② with the chicken wing menu, temperature set to 390°F, time set to 18 min, after the
end of use, the machine did not power off, when the next use, select pot ②, the chicken
wing menu will be directly displayed,the temperature is 390°F , the time is 18 min; this
memory function disappears when the machine is powered off for an hour;
13. Two pots working at the same time, ① button indicator light and the corresponding
menu indicator light of the pot ① blink once 6/seconds at the same time, extinguish time
< 0.5 seconds, after 3 seconds， ② button indicator light and the corresponding menu
indicator light of the pot ① blink 3 seconds. Once 6/seconds at the same time, extinguish
time < 0.5 seconds,the left and right flashes alternately,with an interval of 3 seconds
14. End of sync function: after starting up, select the menu of pot ① and pot ② respectively,
when the two pot menus bake at different times. Press the
button, the
indicator
blinks, press the start key at this time, and the pot with a long time starts to work,Short
time pot display display "HOLD" ,don't start working for a while,the remaining time of the
first working pot is the same as the time of this pot,the two pots began to work together
a) When there is only one pot to choose from,the synchronization key indicator is off,when
both pots are selected,the synchronization key indicator blinks,always light up after
pressing the sync key, then press the power button to start work, and HOLD is displayed for
a short time;
b) After synchronous mode starts to work， adjust the working time of the two pots,when
the original shorter time is longer than the original longer time,exit sync mode,synchronous
light off;
c) Double pot at work,the sync key can no longer operate,the sync key indicator is off ；
d) Double pot end function mode,the pot has a pull out,two pots should stop working at
the same time,pull out to show OPEN， the other one says HOLD.
1 5. Copy menu function: set the menu temperature and time of a pot after turning it on，
press the
button again， indicator blinking,at the same time, another unset pot sets the
， and the
corresponding menu according to the set pot,at this point, press the start key
two pots start working with the same men.
16
Publicité
