Publicité
ASSEMBLY INSTRUCTIONS
Remove all packaging from all parts.
1.
Connect the two long flexible hoses on the water
flow rate control valve assembly (C) to the inlets
on the bottom side of the top fountain (A).
2. Connect the short hose on the water flow rate
control valve assembly (C) to the outlet of the pump
(E).
3. Block the drain hole at the bottom of the fountain
base (B) with the silicone plug (AA).
NOTE : Just need one silicone plug for assembly,
another one is a spare part.
6
A
C
C
E
B
AA
Publicité
