Publicité
ENGLISH
OPERATION
Starting up and temperature regulation
• Insert the plug of the connection lead into
the plug socket with protective earth contact.
When the refrigerator compartment door
is opened, the internal lighting is switched
on. After the fridge has been placed in
position, wait for 5 minutes before electricity
is supplied. Don't store anything until the
temperature inside the fridge becomes low
enough.
The temperature selector knob is located on
the top of the refrigerator compartment.
Setting 0 means: Off.
# Clockwise rotate the knob to turn on the
appliance.
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
Important! Normally we advise you select
setting of 2 or 3 0r 4, if you want the
temperature higher or colder please turn the
knob to warmer or colder setting accordingly.
When you turn the knob to colder which can
GB-18
lead to the more energy efficiency-Otherwise, it
would result the energy-consuming.
Important! High ambient temperatures (e.g. on
hot summer days) and a cold setting (position
6 to 7) may cause the compressor to run
continuously or even non¬stop!
Reason: when the ambient temperature is
high, the compressor must run continuously to
maintain the low temperature in the appliance.
Changing the light bulb
Warning! If the light bulb is damaged. DO
NOT CHANG IT BY THE USER! Changing
the light bulb carry out by inexperienced persons
may cause injury or serious malfunctioning. It
must be replaced by a qualified persons in order
to avoid a hazard. Contact your local Service
Force Center for help.
ENGLISH
GB-19
Publicité
