Publicité
USE OF THE APPLIANCE
Display
Display
Designation
0
Zero
1...9
Power level
A
Heat accelerator
E
Error message
H
Residual heat
L
Locking
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Sensitive touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a "beep" sound.
In the case of a general use press only one key at the same time.
Starting-up
You must first switching on the hob, then the heating zone:
• Start-up/ switch off the hob:
Action
To start
Touch the key
• Start-up/ switch off a heating zone:
Action
Zone selection
Increase power
Decrease power
Stop
If no action is made within 20 second the electronics returns in waiting position.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.
Function
The heating zone is activated.
Selection of the cooking level.
Automatic cooking
Electronic failure.
The heating zone is hot.
Control panel locking.
Control panel
Press key [
]
Press key [
]
Control panel
Press key [ + ]
Press key [ + ]
Press key [ - ]
Press key [ - ]
20
Display
[ 0 ]
Nothing or [ H ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
Publicité
