Publicité
Power Up
Steamer cord must be kept dry.
!
WA R N I N G
Do not handle steamer with wet hands.
1. Unwind power cord completely.
2. Insert plug securely into outlet socket, ensuring proper blade polarity & alignment.
3. Indicator light on side of handheld unit will illuminate solid green showing power is connected.
Continuous Steam
1. Press power button on mopstick handle to turn unit on
> standby mode: blinking green light
Note: Steam mop will not emit steam in upright position.
2. Tilt mopstick handle down for use to activate steam
> continuous steam mode : solid green light
3. To turn steam off, press power button or return mop
to upright position.
Initial steam output may take up to 20 seconds.
Adjust Steam Output
Steam Adjustment Dial
1. Adjust amount of steam output by
turning dial on handheld unit to
desired setting.
Note: There may be slight delay in
steam output response after each
adjustment. This is normal.
!
Steamer operates
WA R N I N G
at a high temperature. Keep it moving
while cleaning and avoid emitting
steam in one place for an extended
period of time, because continuous
heat may damage the flooring
surface.
Upright Uses
Steam Floor Diffuser + Cloths
C l e a n i n g
14
MAX
!
may continue for several seconds
after shut-off. Use caution to avoid
severe burns.
S c r u b b i n g
+
2
MIN
Residual steam
WA R N I N G
• Cleaning Cloth: super-absorbent fine
nap cloth for general cleaning of smooth
flooring surfaces.
• Scrubbing Cloth: super-absorbent long
nap cloth for cleaning of tough messes and
rougher flooring surfaces.
• Suitable for sealed hard floors: ceramic,
stone, laminate, vinyl, linoleum, hardwood,
bamboo, and more.
1
Use velcro cord clip
to help manage power
cord during use. Can
also be used for cord
storage.
Place mop on steam floor
protective pad in between
passes or when finished
cleaning to prevent
damage to flooring.
mynugeni.com
Publicité
