Publicité
measures reduce the risk of starting the tool accidentally.
Vibration Control
Side Handle
The side handle is used to control and
balance the tool. The handle must be thread -
ed into the front housing on either side of the
tool, depending on per sonal preference and
comfort. Use the side handle for safe control
and ease of operation (Fig. 1).
Wheel Guard Installation
grinding or cutting wheels. Always keep
wheel guard be tween you and your work
while grinding or cutting.
TO ATTACH WHEEL GUARD
Disconnect battery pack from tool.
Press and hold the guard release lever (Fig.
2), and place the guard on the guard
mounting flange until the guard's keys line
up with the notches in the spindle collar
(Fig. 2A).
Press the guard onto the guard mounting
flange until the shoulder of the guard is
seated against the flange of the tool, and
turn the guard until it can clearly be heard
to engage.
Adjust the position of the guard to the
requirements of the work process. For this,
press the guard release lever upward and
turn the guard until it clicks into place then
adjust as needed.
• Always adjust the guard in such a manner
that the 2 cams of guard release lever
engage into the corresponding notches of
the guard (Fig. 2B).
• Adjust the guard in such a manner that
sparking is prevented in the direction of
the operator.
• The guard should turn only upon
actuation of the guard release lever!
Otherwise the tool may not continue to
be used under any circumstances and
must be taken to an after-sales service
agent.
Disconnect battery pack from tool before making any assembly,
adjustments or changing accessories. Such preventive safety
Wheel guard must be
attached when using disc
Assembly
GUARD
RELEASE
LEVER
A
Note: The encoding keys on the guard
ensure that only a guard that fits the tool
type can be mounted.
Press guard release lever, rotate guard until
the keys on guard line up with the notches on
the guard mounting flange, and lift guard off
the guard mounting flange (Fig. 2).
-13-
FIG. 2
KEYS
B
TO REMOVE GUARD
GUARD
MOUNTING
FLANGE
Publicité
