Publicité
3. INSTRUCTION FOR USE
PREPARING FOR OPERATION
1. Check the heater for possible shipping damage.
2. Connect the hose and regulator assembly to the PROPANE cylinder by rotating the nut
counterclockwise into the PROPANE cylinder's valve outlet and securely tighten.
3. Open the cylinder's gas valve and check all gas connections with a soap and water
solution.
4. Connect the power cord to a well-grounded 100-240V~, 50-60Hz power source or use the
DC20V battery (Fig 2) (Fig 3)
3.1 IGNITION / Manual ignition
a. Turn the power switch to position ON and check that the fan starts running correctly. (Fig
4.)
b. Push the gas valve button and push repeatedly the piezoelectric lighter until the flame lights
up. (Figure. 5-6-7)
Figure.5
XPCACG20LI
Figure.6
(Fig 2.)
(Fig 3.)
Figure.4
Figure.7
Publicité
