Publicité
OPERATION
STARTING AND STOPPING
Make sure that the ON/OFF switch
is in the
A
"OFF" position before plugging cord into outlet.
DO NOT touch the plug's metal prongs when unplugging or
plugging in the cord.
The ON/OFF switch
is located on the front of the grinder.
A
To turn the machine "ON", move the switch up to the "ON"
position. To turn the machine "OFF", move the switch down to
the "OFF" position.
See Figure 6.
USING THE VARIABLE SPEED
B
CONTROL
A
The grinder is equipped with a variable speed control, located
beside the power switch. When the variable speed control knob
is positioned at the far left position (counterclockwise), the RPM
is 2,000. The rotation increases when the variable speed control
knob is turned clockwise. In the far right position, the RPM is
3,400.
USING THE FLEXIBLE LAMP
Figure
6
The Flexible LED lamp operates independently of the grinder. To
turn the lamp ON and OFF, press the switch
as indicated on
B
the front panel.
See Figure 6.
12
Publicité
