Publicité
1,2,4
1,3
1
Up to 5 customized
equalization
curves
can be stored
as the
manual
modes
Ml - M5.
1
2
3
4
Go through steps 1-4 on previous page.
The created
curve is displayed
for 8 seconds.
Within
8 seconds,
press ENTER.
"M 1" flashes
on the display
for 8 seconds.
If this step is not completed
within
8 seconds,
press GEQ
first to display
"GEQ
ON". Then
within
4 seconds
press
ENTER
repeatedly
until "Ml"
flashes.
Within 8 seconds, turn MULTI JOG to select one
of the manual modes Ml - M5 to store the curve.
Within 8 seconds,
press ENTER.
The new
equalization
curve is stored.
To select
the stored
equalization
curve
Press GEQ,
and turn MULTI JOG to select one of the manual
modes
Ml - M5 within 4 seconds.
1
2
Press
TUNER/BAND
repeatedly
to select
the
desired band.
When
TUNER/BAND
is pressed
while the power
is off, the
power is turned
on directly.
To
select a band with the remote control
Press BAND while pressing
SHIFT.
Press
++
DOWN
or
-
UP to select a station.
Each time the button
is pressed,
the frequency
changes.
When a station is received,
"TUNE
is displayed
for 2 seconds.
During
FM stereo
reception,
(IIUD}II is displayed.
([[ml))
TUNE
To search for a station quickly (Auto Search)
Keep +
DOWN
or -
UP pressed
until the frequency
starts
to change
rapidly.
After tuning
in to a station,
the search stops.
To stop the Auto Search
manually,
press
++
DOWN
or -
UP.
The Auto
Search
may not stop at stations
with very weak
signals.
14
ENGL/SH
Publicité
