Attenuator Setting - Conrad 751222 Notice D'emploi

• Connect the input „DC IN" (1) with the power supply (e.g. via an external power
unit, not part of the delivery).
• Set a free channel of your television via the key „Up" (2) and the key „Down" (3).
The selected channel must at least leave one channel open between the regular
TV-channel and the HF-signal.

8. Attenuator setting

Two setting switches are located on the underside of the digital UHF modulator
housing.
Set the two switches to the appropriate positions for the length of cable you are
using.
26