Channel Display; Channel Selection Keys; Shift Key „Tv/Catv; Channel-Lock - Conrad 751222 Notice D'emploi

6.1 Channel display

Increase the channel number by 100 when on the display „CHANNEL" (1) next to
the display of the channel number additionally a red dot flashes.

6.2 Channel selection keys

Select the desired channel via the key „Up" (2) and the key „Down" (3).
6.3 Shift key „TV/CATV"
Select by pressing the key „TV/CATV" (4) if you want to convert the video signal
into a UHF-channel for the channels 21 to 69 or for cable- and SAT-channels 57 to
106. Depending on the mode the display „CHANNEL" (1) shows, by pressing the
key „TV/CATV" (4), the number 01 for the TV-mode and then the channels 21 to 69
or the number 02 for the cable- and SAT-mode and then the channels 57 to 106.

6.4 Channel-lock

Pressing the key „LOCK" (5) locks the key „Up" (2) and the key „Down" (3). This
avoids an unintended change of the desired channel.
The display „CHANNEL" (1) additionally shows an „L" for „LOCK".
Pressing the key „LOCK" (5) again unlocks the key „Up" (2) and the key „Down" (3).
23