NVT Phybridge PoLRE24 Guide D'installation Rapide

Quick Install Guide: PoLRE24/PoLRE48
The PoLRE (Power over Long Reach Ethernet) family of data switches delivers Ethernet
and PoE (Power over Ethernet) over a single pair of telephony grade wire (CAT 3) with 4
times the reach of traditional data switches. With the PoLRE switch customers can
transform their existing voice infrastructure into an IP network with power ideal for IP
device deployment. For complete details refer to the Hardware Installation Guide at
www.nvtphybridge.com.
NOTE: Please see page 3 for important safety instructions
PoLRE24 & PoLRE48 Switch
Installation Details
System Grounding: See Page 5
Location and Regional Specifications:
PoLRE kan installeres overalt indendørs undtagen i Finland, Norge og
Sverige, hvor i disse tre nordiske lande den skal installeres på et sted
med begrænset adgang.
PoLRE kan installeres innendørs i alle land unntatt Finland, Norge og
Sverge. I disse tre nordiske landene må den installeres på et sted med
begrenset tilgang.
Space Requirements:
1. Select a standard 19" equipment rack or, for a standalone installation, a flat, stable surface capable of supporting the size and weight of
the PoLRE, its installable components and cabling.
2. Ensure that you have enough rack space for all equipment. Shelves and rear supporting brackets are not mandatory.
Location Requirements:
Power - The PoLRE switch must be placed within 6 feet of an available power source. Do not use an extension cord to connect the equipment to a
power outlet.
Downlink – The Phylinks can be installed up to 1,200ft (365m) away from the PoLRE switch.
Installation procedures will be trouble‐free if you ensure that the following items are available before you begin:
• The PoLRE switch, all cables and accessories you received in the PoLRE package.
• All PhyLinks required for connecting the IP endpoint devices, provided with the product package according to the quantity ordered.
• SFP transceiver modules for the Gbic uplink trunks if connecting over fiber.
• Fiber optic LAN cables for the Gbic uplink trunks (user-supplied) if connecting over fiber.
• Standard CAT5e copper LAN cables for the GbE uplink trunks (user‐supplied).
• Standard CAT3 unshielded single twisted pair cables, 24 AWG, for the downlink ports (user-supplied).
• Serial console cable for the CONSOLE port, provided with the product package.
• Standard CAT5e or CAT-6 Ethernet LAN cable for the MGMT port. Optional, only if out-of-band management is required (user‐supplied).
• Protective ground cable (user‐supplied).
888.901.3633 | +44 (0) 208 977 6614 | www.nvtphybridge.com
The PoLRE can be installed in any indoor location in all countries
except in Finland, Norway and Sweden, where, in these 3 Nordic
countries, it must be installed in a restricted access location.
PoLRE kan installeras på valfri plats inomhus i samtliga länder utom
Finland, Norge och Sverige; i dessa nordiska länder måste den
installeras på en plats med begränsad åtkomst.
Copyright 2024 NVT Phybridge | 413-0002-F |
PoLRE 24-Port Switch
PoLRE 48-Port Switch
PoLRE Package Includes:
1 x PoLRE24- or 48-port Unit
•
1 x Rackmount Bracket Kit
•
1 x Console Cable
•
1 x Power Cable
•
PhyLink Package Includes:
6 x PhyLinks
•
Page | 1