Télécharger
Partager
Imprimer la page
Sauder 433362 Mode D'emploi
  1. Manuels
  2. Marques
  3. Sauder Manuels
  4. Ameublement d'intérieur
  5. 433362
  6. Mode d'emploi
Sauder 433362 Mode D'emploi

Sauder 433362 Mode D'emploi

Masquer les pouces

Publicité

Liens rapides

Télécharger ce manuel
CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE RETAILER.
sauder.com/service
Visit
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Executive Desk
Clifford Place Collection | Model 433362
Sauder.com
Share your journey!
to order replacement parts, view video assembly tips, or chat with a live rep.
1-800-445-1527
.
Business or pleasure.
Works both ways.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-38
Français pg 39-43
Español pg 44-48
Lot # 576878
Purchased: __________________
01/17/22

Publicité

loading

Manuels Connexes pour Sauder 433362

Sommaire des Matières pour Sauder 433362

  • Page 1 Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays) Business or pleasure. Works both ways. Executive Desk NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Clifford Place Collection | Model 433362 PLEASE READ AND KEEP FOR FUTURE REFERENCE. Sauder.com English pg 1-38 Français pg 39-43 Español pg 44-48...
  • Page 2 BB LARGE RIGHT DRAWER SIDE (2) BOTTOM (2) LARGE DRAWER FRONT (2) CC DRAWER BOTTOM (6) SHORT TOP MOLDING (2) SMALL LEFT DRAWER SIDE (2) DD MODESTY PANEL SHELF (1) LONG TOP MOLDING (1) SMALL DRAWER BACK (2) BRACE (4) Page 2 www.sauder.com/service 433362...
  • Page 3 Part Identification Hardware Identification LONG EXTENSION LONG EXTENSION (EXTENSION SET SHOWN SEPARATED) RAIL - 4 SLIDE - 4 SHORT EXTENSION SHORT EXTENSION (EXTENSION SET SHOWN SEPARATED) RAIL - 2 SLIDE - 2 433362 www.sauder.com/service Page 3...
  • Page 4 1-1/2" FLAT HEAD SCREW - 24 1-1/8" FLAT HEAD SCREW - 18 9/16" WAFER HEAD SCREW - 2 BLACK 1/2" FLAT HEAD SCREW - 48 1/2" PAN HEAD SCREW - 36 SILVER 1/2" FLAT HEAD SCREW - 16 Page 4 www.sauder.com/service 433362...
  • Page 5 Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
  • Page 6 Push the black lever down and pull the SLIDE from the RAIL. BLACK 1/2" FLAT HEAD SCREW 1/2" PAN HEAD SCREW (6 used for the CABINET RAILS) (3 used for the EXTENSION RAIL) Roller end Open end Angled head (6 used) Page 6 www.sauder.com/service 433362...
  • Page 7 Insert a GROMMET (9) into the large hole in the LEFT UPRIGHT (C). Use this hole. Use these holes. Push the black lever down and pull the SLIDE from the RAIL. Angled head Open end 1/2" PAN HEAD SCREW (3 used for the EXTENSION RAIL) 433362 www.sauder.com/service Page 7...
  • Page 8 Insert a GROMMET (9) into the large hole in the BOTTOM (H). å Repeat this step for the other BACK (F), BOTTOM (H), and BRACES (K). (28 used in this step) (2 used) Angled head (4 used) Page 8 www.sauder.com/service 433362...
  • Page 9 Rounded edge S u r f a c H I D D E N i t h (4 used in this step) Arrow The CAM SCREWS must be here.  433362 www.sauder.com/service Page 9...
  • Page 10 Fasten two BRACES (K) to the LEFT END (B). Tighten two The arrow must HIDDEN CAMS. point toward the å NOTE: Be sure the WOOD DOWELS in the BRACES insert edge of the board. into the LEFT END. Arrow Arrow Arrow Page 10 www.sauder.com/service 433362...
  • Page 11 BRACES (K). Tighten six LARGE HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the BACK, BOTTOM, and BRACES insert into the LEFT UPRIGHT. The arrow must point toward the edge of the board. 433362 www.sauder.com/service Page 11...
  • Page 12 Step 8 å Turn and tighten four FEET (M) into the BOTTOM (H). Remember: Righty tighty. Lefty loosey. Page 12 www.sauder.com/service 433362...
  • Page 13 Push four SHORT WOOD DOWELS (5) into the BOTTOM (H). å Fasten two BOTTOM MOLDINGS (L) to the BOTTOM (H). Use four 1-1/8" FLAT HEAD SCREWS (16). 1-1/8" FLAT HEAD SCREW (4 used in this step) 433362 www.sauder.com/service Page 13...
  • Page 14 Step 10 å Turn four LEVELERS (7) into the FEET (M). å NOTE: The LEVELERS will be adjusted in the last step. Page 14 www.sauder.com/service 433362...
  • Page 15 Push the black lever down and pull the SLIDE from the RAIL. Angled head BLACK 1/2" FLAT HEAD SCREW (6 used for the CABINET RAILS) Roller end Open end (6 used) 1/2" PAN HEAD SCREW (3 used for the EXTENSION RAIL) 433362 www.sauder.com/service Page 15...
  • Page 16 Push the black lever down and pull the SLIDE from the RAIL. BLACK 1/2" FLAT HEAD SCREW (6 used for the CABINET RAILS) 1/2" PAN HEAD SCREW (3 used for the EXTENSION RAIL) Roller end Open end Angled head (6 used) Page 16 www.sauder.com/service 433362...
  • Page 17 Insert a GROMMET (9) into the large hole in the RIGHT UPRIGHT (D). Use this hole. Use these holes. Push the black lever down and pull the SLIDE from the RAIL. Open end Angled head 1/2" PAN HEAD SCREW (3 used for the EXTENSION RAIL) 433362 www.sauder.com/service Page 17...
  • Page 18 Fasten two BRACES (K) to the RIGHT END (A). Tighten two The arrow must HIDDEN CAMS. point toward the å NOTE: Be sure the WOOD DOWELS in the BRACES insert edge of the board. into the RIGHT END. Page 18 www.sauder.com/service 433362...
  • Page 19 BOTTOM (H), and BRACES (K). Tighten six LARGE HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the BACK, BOTTOM, and BRACES insert into the RIGHT UPRIGHT. The arrow must point toward the edge of the board. 433362 www.sauder.com/service Page 19...
  • Page 20 Push four SHORT WOOD DOWELS (5) into the BOTTOM (H). å Fasten two BOTTOM MOLDINGS (L) to the BOTTOM (H). Use four 1-1/8" FLAT HEAD SCREWS (16). 1-1/8" FLAT HEAD SCREW (4 used for the MOLDINGS) Page 20 www.sauder.com/service 433362...
  • Page 21 Step 17 å Turn four LEVELERS (7) into the FEET (M). Now might be a å NOTE: The LEVELERS will be adjusted in the last step. good time to refresh your drink. 433362 www.sauder.com/service Page 21...
  • Page 22 Step 18 å Turn two ANGLED HEAD CAM SCREWS (3) into the Angled head MODESTY PANEL (G). å Push six LONG WOOD DOWELS (6) into the edges of the MODESTY PANEL (G) and MODESTY PANEL SHELF (DD). Page 22 www.sauder.com/service 433362...
  • Page 23 PANEL (G). Tighten two LARGE HIDDEN CAMS. å NOTE: Be sure the WOOD DOWEL in the MODESTY PANEL SHELF inserts into the hole in the MODESTY PANEL. The arrow must point toward the edge of the board. 433362 www.sauder.com/service Page 23...
  • Page 24 LARGE HIDDEN CAMS. The arrow must å NOTE: Be sure the WOOD DOWELS in the MODESTY point toward the PANEL and MODESTY PANEL SHELF insert into the edge of the board. holes in the UPRIGHTS. Arrow Arrow Page 24 www.sauder.com/service 433362...
  • Page 25 Push fourteen LARGE HIDDEN CAMS (1) into the ENDS (A and B), UPRIGHTS (C and D), BACKS (F), and MODESTY PANEL (G). Arrow Arrow Arrow The arrow must be pointing up. The arrow must be pointing up. 433362 www.sauder.com/service Page 25...
  • Page 26 TOP will fasten easier in step 24. å NOTE: Be sure the WOOD DOWELS in the TOP insert into the holes in the TOP MOLDINGS. 1-1/8" FLAT HEAD SCREW (7 used in this step) Rounded edge Rounded edge Rounded edge Page 26 www.sauder.com/service 433362...
  • Page 27 Step 23 å Turn fourteen ANGLED HEAD CAM SCREWS (3) into Angled head the TOP (E). (14 used) 433362 www.sauder.com/service Page 27...
  • Page 28 NOTE: Be sure the WOOD DOWELS in the ENDS, UPRIGHTS, and MODESTY PANEL insert into the holes in the TOP. å Tighten the SCREWS in the TOP MOLDINGS. The arrow must point toward the edge of the board. Page 28 www.sauder.com/service 433362...
  • Page 29 Step 25 å Turn twenty-four STRAIGHT HEAD CAM SCREWS (4) into the DRAWER FRONTS (Q, R, and S). Straight head (24 used) 433362 www.sauder.com/service Page 29...
  • Page 30 Fasten the SMALL DRAWER BACK (U) to the SMALL DRAWER SIDES (T and V). Use four 1-1/2" FLAT HEAD SCREWS (15). å NOTE: Be sure the DRAWER BOTTOM (CC) inserts into the groove of the SMALL DRAWER BACK (U). å Repeat this step for the other small drawer. Page 30 www.sauder.com/service 433362...
  • Page 31 Fasten the DRAWER BACK (X) to the DRAWER SIDES (W and Y). Use four 1-1/2" FLAT HEAD SCREWS (15). å NOTE: Be sure the DRAWER BOTTOM (CC) inserts into the groove of the DRAWER BACK (X). å Repeat this step for the other drawer. 433362 www.sauder.com/service Page 31...
  • Page 32 Fasten the LARGE DRAWER BACK (AA) to the LARGE DRAWER SIDES (Z and BB). Use four 1-1/2" FLAT HEAD SCREWS (15). å NOTE: Be sure the DRAWER BOTTOM (CC) inserts into the groove of the LARGE DRAWER BACK (AA). å Repeat this step for the other large drawer. Page 32 www.sauder.com/service 433362...
  • Page 33 Repeat this step for the remaining small drawer and drawer. Roller end SILVER 1/2" FLAT HEAD SCREW Roller end (8 used in this step) BLACK 1/2" FLAT HEAD SCREW (24 used in this step) Roller end Roller end 433362 www.sauder.com/service Page 33...
  • Page 34 Push two FILE HANGERS (12) onto the FILE GLIDES (13). å Repeat this step for the remaining large drawer. 1/2" PAN HEAD SCREW (12 used in this step) Open end SILVER 1/2" FLAT HEAD SCREW (4 used in this step) Open end Page 34 www.sauder.com/service 433362...
  • Page 35 Use four SILVER 1/2" FLAT HEAD SCREWS (19) as shown in the lower diagram. These small holes must be closer to this edge. 1-1/8" FLAT HEAD SCREW (3 used in this step) SILVER 1/2" FLAT HEAD SCREW (4 used in this step) 433362 www.sauder.com/service Page 35...
  • Page 36 SHELF (N). Use two 9/16" WAFER HEAD SCREWS (17). 1/2" PAN HEAD SCREW (6 used in this step) Open end Open end These hole must be here. 9/16" WAFER HEAD SCREW (2 used in this step) Page 36 www.sauder.com/service 433362...
  • Page 37 Repeat this to insert the KEYBOARD SHELF (N). 75 lbs. 15 lbs. 20 lbs. 15 lbs. 30 lbs. 15 lbs. 20 lbs. 30 lbs. Place the roller on the SLIDE behind the roller on the RAIL. 433362 www.sauder.com/service Page 37...
  • Page 38 NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or Turn the LEVELERS clockwise or counter clock-wise to raise or lower the DESK.
  • Page 39 Modèle 433362 Bureau Ministre Utilisez les instructions d’ a ssemblage en français avec les NOUS CONTACTER EN PREMIER schémas étape par étape du manuel d’instruction en anglais. AVANT D'EFFECTUER TOUT RETOUR AU MAGASIN. Chaque étape en français correspond à la même étape en Nous faisons de notre mieux pour nous assurer que votre meuble anglais.
  • Page 40 REMARQUE : S’ a ssurer d’insérer les CHEVILLES EN BOIS de Fixer la COURTE GLISSIÈRE D'EXTENSION (GG) au MONTANT l'ARRIÈRE, DESSOUS et ENTRETOISES dans l'EXTRÉMITÉ GAUCHE. GAUCHE (C). Utiliser trois VIS TÊTE GOUTTE DE SUIF 13 mm (20). Page 40 www.sauder.com/service 433362...
  • Page 41 Utiliser quatre VIS TÊTE PLATE 28 mm (16). le MONTANT DROIT. Faire tourner les VIS dans les trous. REMARQUE : La LONGUE COULISSE D'EXTENSION sera utilisée ultérieurement pour les TIROIRS. 433362 www.sauder.com/service Page 41...
  • Page 42 DESSUS se fixera plus facilement à Répéter cette étape pour l'autre tiroir. l'étape 24. REMARQUE : S’ a ssurer de bien insérer les CHEVILLES EN BOIS du DESSUS dans les trous des MOULURES DE DESSUS. Page 42 www.sauder.com/service 433362...
  • Page 43 DEVANT DE TABLETTE DE CLAVIER (P). Utiliser trois VIS TÊTE PLATE 28 mm (16). Fixer les CHARNIÈRES (8) au DEVANT DE CHARNIÈRE DE TABLETTE DE CLAVIER (O). Utiliser quatre VIS TÊTE PLATE 13 mm ARGENTÉES (19) comme l'indique le schéma inférieur. 433362 www.sauder.com/service Page 43...
  • Page 44 RIEL DE EXTENSIÓN LARGO ........4 necesita ponerse en EXTREMO IZQUIERDO ............1 CORREDERA DE EXTENSIÓN LARGA ....4 contacto con Sauder en PARAL IZQUIERDO ..............1 RIEL DE EXTENSIÓN CORTO ........2 cuanto a esta unidad, PARAL DERECHO ..............1 CORREDERA DE EXTENSIÓN CORTA ....
  • Page 45 NOTA: Asegúrese de que los PASADORES DE MADERA en el DORSO, DE EXTENSIÓN CORTO (GG) como se muestra en el diagrama FONDO y las RIOSTRAS se inserten en el PARAL IZQUIERDO. superior. Prepárese, las piezas son grasientas. 433362 www.sauder.com/service Page 45...
  • Page 46 A continuación deslice el cartucho interno del RIEL DE EXTENSIÓN hacia el interior para encontrar los dos otros agujeros que se alinean con los agujeros del PARAL DERECHO. Atornille los tornillos en los agujeros. Page 46 www.sauder.com/service 433362...
  • Page 47 NOTA: Asegúrese de que el FONDO DE CAJÓN (CC) ajuste SUPERIOR (E). Utilice siete TORNILLOS DE CABEZA PERDIDA de dentro de la ranura del DORSO DE CAJÓN (X). 28 mm (16). Repita este paso para el otro cajón. 433362 www.sauder.com/service Page 47...
  • Page 48 CABEZA PERDIDA de 28 mm (16). Fije las BISAGRAS (8) a la CARA DE BISAGRA DE ESTANTE DE TECLADO (O). Utilice cuatro TORNILLOS PLATEADOS DE CABEZA PERDIDA de 13 mm (19) como se muestra en el diagrama inferior. Page 48 www.sauder.com/service 433362...
  • Page 49 à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 433362 www.sauder.com/service Page 49...
  • Page 50 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 50 www.sauder.com/service 433362...
  • Page 51 à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Page 52 BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.