Boost -INBOX300 Manuel D'utilisation page 3

OPERATING INSTRUCTIONS
1. Switch off the power and connect your sources to the corresponding input jacks.
2. Turn on the power and wait 3-4 seconds till the speaker functions are connected.
3. Select an audio source by pressing the INPUT A key on the front panel to display AUX A, BT-A, FM, USB A. Press
the INPUT B key on the front panel to display LINE,USB B.
4. Adjust the VOLUME/MULTI knob on the front panel or the VOL+/- key on the remote control to adjust the setting
of the main volume. Then adjust the volume of USB A via the left volume fader, and the volume of the USB B via
the right volume fader control.
5. Press the MENU key on the front panel to display BASS, TREBLE, XDRIVE, AUTO, MAIN then adjust the VOLUME
knob to change music treble, bass, light mode and sound effect.
6. Press the DJ button on the front panel to display SCRATCH, REVERB, BEAT BOX, YEAH, DJ OFF mode, then adjust
the DJ knob to design and change the music effect as you like.
7. Press the LIGHT button on the remote control or press the MENU button on the front panel to display light mode,
then press the VOLUME/MULTI knob to change the OFF, R, G, B, RG, RB, GB, RGB, AUTO,DEMO light mode.
8. Press the MUTE key to mute, press it again to reset. Press X Drive on the remote to turn on/off X-Bass effect.
Light color combinations
Following color combinations are available via the MENU button on the control panel or the LIGHT button on the
remote control:
● R = red lights flash
● G = green lights flash
● B = blue lights flash
● RG = red and green lights flash
● RB = red and blue lights flash
● GB = green and blue lights flash
● RGB = red, green, and blue lights flash
● Auto = the various color combinations cycle through and flash.
● Demo = lights flash and change color as if they were responding to the beat of the music.
Tuner applications
1. Before using the radio functions, you must attach the supplied antenna. Adjust the antenna to obtain optimum
reception.
2. Press the INPUT A key on the front panel (amplifier) or the FM key on the remote control, to select "FM"
function.
3. Press the CH+/CH- key on the remote control to find radio bands that you have previously saved.
4. Press or hold the TU+/TU- key on the remote control to adjust the radio frequency manually.
5. Press the AUTO key on the remote control, the machine will scan radio channels from low-frequency to high-
frequency by itself and memorize the channels one by one.
KARAOKE & GUITAR Function
1. The machine can auto detect whether MIC 1, MIC2 or GUITAR is inserted.
2. Please turn off the microphone volume and adjust the volume gradually after inserting the microphone.
3. Press VOL+/- on the remote or adjust the MIC.VOL knob on the front panel to change the microphone VOLUME.
4. Adjust the ECHO knob on the front panel to change the microphone ECHO.
5. Adjust the GUITAR.VOL knob on the front panel to change the guitar VOLUME.
Note: Do not touch the top of the microphone when singing in order to avoid howling effect.
6. Adjust the microphone volume gradually to avoid howling effect.
Bluetooth pair and connect
1. Turn off any Bluetooth devices previously paired (linked) with this unit.
2. Turn on the Bluetooth features on your phone or music player.
3. Turn on and set this unit to Bluetooth mode. The flashing blue light BT on LED display indicates it is in pairing
mode.
4. Set your phone or music player to search for Bluetooth devices.
5. Select BOOSTBOX300 from search results on your phone or music player.
©LOTRONIC 2016 BOOST-INBOX300 3