Publicité
4. Align leg bracket with holes in pedestal file. Use two
#8 x 1/2" screws to secure. Repeat for remaining
legs. (See Figure 3)
Figure 3
Screw
Leg
Bracket
5. With two people, set desk upright and position in
desired location.
6. With two people, turn return desk upside down.
7.
Remove two screws holding drawer to underside of
return desktop. (See Figure 4)
Figure 4
Drawer
8. Follow steps 2-4 to install remaining legs.
PAGE 2 OF 9
ASSEMBLY CONTINUED
9. Remove filler block and discard. (See Figure 5)
Figure 5
Filler Block
10. With two people, set return desk upright and position
with top connector plate under assembled 30 x 66"
pedestal desk. Align holes and use five #8 x 3/4"
screws to secure. (See Figure 6)
Figure 6
NOTE: Keep filler block screws for next step.
Screw
Top
Connector
Plate
0124 IH-8204
Publicité
