Symmons Origins 9603-PLR Instructions De Montage

9603-PLR
Hand Shower System
Specification Submittal
Model Numbers

9603-PLR
Origins Hand Shower System
Modifications
 -1.5 1.5 gpm (5.7 L/min) flow restrictor
-2.0
 2.0 gpm (7.6 L/min) flow restrictor
 -X Integral service stops
-CHKS
 Integral check stops
 -IPS 1/2" female IPS connections
-REV
 Reverse coring for back to back
installations
 -LP Loop handle
-B
 Chrome brass escutcheon
 -D Chrome brass dome cover
-VP
 Vandal proof escutcheon screws
Quick disconnect on hand shower units
 -QD
White vinyl hose in place of metal hose
 -R
Elevated vacuum breaker
 -VB
 -OP
13" oval plate
6' hose in place of 5' standard
 -72
30" adjusting bar in place of standard 36"
 -B30
bar
48" adjusting bar in place of standard 36"
 -B48
bar
Less grab bar
 -L/GB
24" grab bar in place of standard 36" bar
 -T24
 -TRM
Trim only, valve not included
 -STN Satin Nickel finish
Note: Append appropriate -suffix to model number.
Location:
Origins
™
Specification
Hand shower system powered by the Temptrol
Pressure Balancing valve. Features adjustable stop
screw to limit handle turn, 36" slide bar, in-line vacuum
breaker, 60" flexible metal hose, ADA hand shower
and standard 2.5 gpm (9.5 L/min) flow restrictor.
Components made from metal and nonmetallic materials
plated in standard polished chrome finish.
Compliance
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
2.0 gpm (7.6 L/min)
Print
®
Certi ed by
CSA Group
Reset Form