Publicité
6.
Heat dissipation area
During operation, the appliance emits heat to the environment.
Therefore there must be at least 2 centimeter clearance on the top, at
least 2 centimeter on both sides and at least 2 centimeter on the back
of the fridge (see also page 35).
7.
Installation of the appliance
•
This appliance is intended for use as a built-in refrigerator.
•
Before plugging in the power cable, check that the voltage and
frequency of the type plate match your power supply network. The
appliance must be earthed. The power cable is supplied with a
contact for this purpose. If the socket is not earthed, connect the
appliance to a separate earth according to current regulations and
consult a quali ed electrician.
8.
Mounting accessories
- Adjustable shelves
The walls of the appliance are equipped with a series of guide
pro les so that the shelves can be inserted if desired.
- Installing the door compartments
To store food of different sizes, the door compartments can be set to
different heights. Proceed as follows: gradually pull the compartment
in the direction of the arrows until it comes loose and put it in the
desired position.
38
Publicité
