Publicité
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
1/2" Wrench
■
Parts Supplied:
Mounting brackets (3)
■
Hex nuts (6)
■
Bracket Use Requirements
Intended for use with Gladiator
■
GearLocker cabinets only.
NOTE: These brackets are not designed to be installed on
cabinet models: GATGB000LG0 and GATGBL00LG0.
Intended to be used for mounting on Gladiator GearWall
■
panels or GearTrack
channels.
®
Brackets will support a cabinet with a maximum weight limit
■
of 300 lbs (136 kg).
Unpack Brackets
1. Verify contents. See "Parts Supplied."
2. Dispose of/recycle all packaging materials.
2
MOUNTING BRACKET SAFETY
Your safety and the safety of others are very important.
INSTALLATION INSTRUCTIONS
1/4" x 1/2" Carriage bolts (6)
■
Washers (6)
■
Welded-Steel Tall GearBox &
®
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
Attach Mounting Brackets
IMPORTANT: There are three groups of four slots in the back
panel of the tall cabinet. The mounting brackets must be
attached to the top pair of slots in each group.
®
Publicité
