Publicité
2. ASSEMBLY
MAKE SURE THE HEATER IS NOT FUNCTIONING BEFORE YOU HANG IT ON A GAZEBO, UNDERNEATH A
BALCONY OR A ROOF.
1. Make sure the support chain is well attached to the heater.
2. Attach the other end of the support chain around or onto a secure post, beam or any solid attachment object.
You can also attach the support chain onto itself going around an obstacle to install the heater.
3. Connect the heater to an AC 120V/60 Hz wall outlet.
4. Press on the main On/Off switch to activate the heater.
NOTE: Wait until the heater heating element has cooled down before moving it.
REMEMBER, portable electric heaters are designed for spot heating or as a supplementary heat source. They are not
intended to be the main source of heat during cold months.
Caution:
You must always make sure there is at least 1.5 ft/50 cm of empty space from the heater to the
ceiling, 25 cm (9 inches) from the side to a wall and 180 cm (5 feet) below the heater to the floor.
3. OPERATION
1) Press on the main On/Off switch to activate the heater.
2) Press on the heating mode activation button under the heater to select the desired heat.
If you must use an extension cord, the cord size should be at least NO .14 AWG and rated
than 1875 Watts.
for no less
2
Publicité
