Publicité
automatically scan for DAB/DAB+ stations.
• Press „Mode" to go to the main menu, press „Tuning p/q" to
select different operation modes (DAB, FM or Bluetooth).
• At any operation mode, press „back" to go to the previous
screen.
• When music is playing, press „+ / -" to adjust the volume.
to mute the sound, then press „+ / -" or
Press
to resume
the volume.
4. DAB
Note: Before listening to the radio, ensure that the DAB/FM An-
tenna is adjusted in a proper direction.
The icon on the top right corner of the display shows the strength
of the DAB/DAB+ signal detected by the device.
4.1. Scanning for DAB+ stations
Auto scanning: Press „Scan" to run full scan of all stations.
Alternatively, press „Menu" to enter the menu where you can
select „SCAN" to run the same operation. All stations are shown
in the Station List after scanning.
4.2. Station List
Press „Menu" to enter the menu, then select „Station List" to
view the list of stations already scanned. Press „Tuning p/q"
to select the station you want to listen and press „OK" to con-
firm.
4.3. Manual Tune
If the device cannot receive the DAB+ station you are loOKing
for, press „Tuning p/q" to select station frequency manually.
Once selected, press „OK" to confirm and the station frequency
English
29
Publicité
