On/Off Button; Package Contents; Technical Characteristics Of The Product; Before The First Use - senya SYBF-CM009 Notice D'utilisation

Masquer les pouces Voir aussi pour SYBF-CM009:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
1
Water level indicator
3
Heating plate
4.1
Hour adjustment button
4.3

ON/OFF button

4.5
Aroma selector button
II.2 PACKAGE CONTENTS
 Coffee Maker
 Spoon
 Instruction manual
II.3 TECHNICAL CHARACTERISTICS OF THE PRODUCT
 Enjoy your coffee with this coffee maker that can be programmed up to 24 hours in advance
 Thermal carafe
 Capacity of 1.2 L
 Aroma selector
 LCD display
 Automatic drip-stop system so that you can remove the coffee pot at any time
 Stops automatically after a maximum of 5 minutes after the last cycle
 Visible water level indicator
 Plate to keep your coffee hot
 Permanent and removable filter basket
 Measuring scoop provided
 Stainless steel finishing
 Voltage: 220-240V, 50/60Hz
 Power: 800W
III- USE
III.1 BEFORE THE FIRST USE
1. Clean the coffee pot with hot soapy water. Rinse the coffee pot with clear water and dry
thoroughly.
2. Fill the reservoir with cold water up to the maximum level shown (12 cups).
3. Run the coffee maker for 2 cycles using only water.
4. When this is finished, you can start to use the device.
III.2 USING THE APPLIANCE
III.2.1 Setting the current time
Once the appliance is plugged to a wall outlet:
1. Press the "PROG" (programming) button once. The word "CLOCK" appears at the top right of
the screen.
2
Thermal carafe
4
Control panel with display screen
4.2
Minutes adjustment button
4.4
Programming button
14

Publicité

Table des Matières
loading

Table des Matières