Publicité
IN WALL OR MASONRY FIREPLACES
NOTE: For all in-wall installations, we recommend using our TAGU 23RK1 Recessed Installation Kit
(not included) .
The special frame provides proper airflow to the air intake vent and allows for easy fixing in wall or
other constructions and removal of the firebox if the product should need to be sent back for warran-
ty repairs.
A new outlet can be installed inside the framing construction. Plug the fireplace into a 13 Amp/240
Volt outlet. If the cord is not long enough you may use an extension cord rated for a minimum of 13
Amps.
For detailed instructions on how to mount the firebox in wall, see the TAGU 23RK1 Recessed Installa-
tion Kit's instruction manual .
MOUNTING THE FIREBOX
15
EN
Publicité
