Publicité
Fitting instruction Superbike-Kit
Model: Aprilia Falco SL1000
Type: PA
Important: If you are not a trained motorcycle mechanic stop
now. Ask a local motorcycle shop to do the work for you.
Please read the LSL-Superbike-Kit Fitting instructions.
Recommended bar:
Length of brake-lines:
Code for cable routing:
... in front of the fork
... behind the fork
Throttle cable:
Clutch cable:
Choke cable:
Cut the faring.
Instructions:
Mount the ignition lock with bushing and screws at the LSL top yoke.
Place the big bushing under the top yoke on top of the bearing
before mounting. First tighten the central nut and then the clamping
screws.
Lay the choke cable between tank and frame aside the gas cable to
the outside. Also exchange the clutch cable.
Mount the clutch fluid reservoir with bushing, screw and original
holder plate. Bound the steering stop with the bushings
∅23,5×7,65×10,5mm at the bottom yoke.
Part no.: 120A010
Type 01 (A01 / E01 / L01)
70 + 75cm (BK12)
Position of cable from riders position ...
... right from steering head
F
... left from steering head
B
F /
B /
B /
LSL-Motorradtechnik GmbH • D-47809 Krefeld
www.lsl.eu
Year: ´00
R
L
L
R
L
Stand: 11.05.2007
Publicité
