Publicité
en-us_main.book.book Page 44 Tuesday, February 7, 2023 1:51 PM
44 MAINTENANCE
3
When thawing is complete, dry clothes as
usual.
Thawing out the Appliance Manually
1
Open the dryer door and pull out both the
inner and outer filters.
2
Carefully pour 34 oz. (1 liter) of hot water at
140 ℉ / 60 ℃ into the lint filter compartment
and then reinsert both lint filters.
CAUTION
• Pouring more that 51 oz. (1.5 liters) of water into
the compartment will cause water to leak out.
• Wear gloves and use care when pouring hot
water. 140 ℉ (60 ℃) water can cause scalding or
burns. Using water that is hotter than that can
cause the appliance to malfunction.
3
Turn on the appliance and run the Normal
cycle for about 30 seconds. Then wait about
30 minutes.
4
Run the Normal cycle again. Check if the
message appears within 10 minutes of
running the appliance.
• If the
message appears go to step 2 and
OE
repeat procedure.
• If the
message does not appear, the
OE
thawing process is done.
5
When thawing is complete, dry clothes as
usual.
OE
Publicité
