Publicité
Residual heat indicator
The residual heat indicator lights up, as soon as the corresponding
cooking zone is hot.
1
Danger! Risk of burns from residual heat. After being switched off, the
cooking zones need some time to cool down. Look at the residual heat
indicator.
2
Residual heat can be used for melting and keeping food warm.
Operating the hob
You operate the appliance with the combination appliance's ring
switches. The operation and the function of the ring switches is de-
scribed in the Operating Instructions for the combination appli-
ance.
3
When a cooking zone is switched on, it may hum briefly. This is a char-
acteristic of all ceramic glass cooking zones and does not impair either
the function or the life of the appliance.
Switching the outside ring on and off
By switching the outside rings on or off, the effective heating surface
can be matched to the size of the cookware.
3
Before an outside ring can be switched on, the inside ring must be
switched on.
Triple cooking zone
To switch on middle
ring
To switch on outside
ring
To switch off outside
ring
To switch off middle
ring
Roasting zone
To switch on outside ring
To switch off outside ring
Sensor panel
Touch
for 1-2 seconds
Touch
for 1-2 seconds
Touch
for 1-2 seconds
Touch
for 1-2 seconds
Sensor panel
Touch
for 1-2 seconds. is lit
Touch
for 1-2 seconds. goes out
Power indicator
.
One power indicator is lit.
.
Two power indicators are lit.
.
Second power indicator goes out.
.
First power indicator goes out.
Power indicator
7
Publicité
