Warmup 3iE Manuel D'installation Et De Programmation page 13

sETTInGs
Theme
• Change the content and style of home screen and
standby screen
Standby brightness
• Set the brightness of the LCD screen in standby mode
between 0 (dimmest) and 5 (brightest)
Note: when set to 0 the LCD screen will turn OFF and
the "wake" LED will not be illuminated. You will need to
remember that you turn the screen on by pressing
Display brightness
• Set the brightness of the LCD screen in normal operation
between 1 (dimmest) and 6 (brightest)
Heating indication
• This feature allows you to turn off the heating indication
LED (top right of the LCD screen). The thermostat will
continue to operate as normal but the LED will not turn
on to indicate when heating has started and stopped.
Audio feedback
• This feature allows you to turn off the beep sound made
when a button is pressed
Child lock
• Child lock creates a delay between pressing "wake" and
exiting the standby mode. When child lock is on you will
need to hold "wake" continuously for 10 seconds in order
to exit standby mode.
24/7 Technical hotline - Ligne d'assistance technique - Línea de asistencia técnica
US 1.888.927.6333 / CAN 1.888.592.7687
13