Publicité
To Select the Source
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the ENTER
button to select "Input".
2. Press the ENTER
button to select "Source List".
Press the
or
buttons to select signal source, then press the ENTER
When you connect equipment to the LCD, you can choose between the following sets of
jacks: TV, AV1, AV2, S-Video1, S-Video2, Component, PC, HDMI1, or HDMI2 on the
TV's rear panel.
HDMI1 or HDMI2 input can only be selected when the external device is turned on and
connected via HDMI.
AV2/S-Video2 is placed on the side of the TV.
You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.
1. Press the MENU button to display the menu.
Press the ENTER
button to select "Input".
Press the
or
buttons to select "Edit Name", then press the ENTER
2. Press the
or
buttons to select "AV1", "AV2", "S-Video1", "S-Video2",
"Component", "PC", "HDMI1" or "HDMI2" input jack, then press the
ENTER
button.
3. Press the
or
buttons to select "VCR", "DVD", "D-VHS", "Cable STB", "HD
STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver", "Game",
"Camcorder", "DVD Combo", "PC", "VOD STB", or "TV" input source, then press
the ENTER
button.
Press the EXIT button to exit.
English-22
button.
button.
Publicité
