Publicité
Put the Ø10 gasket,front wheel, Ø10 gasket and M10 nut into the front axle in turn.
Fix The nut with the M10 wrench and then attach the wheel trim to the front wheel.
Place the drive motor,rear wheel, Ø10 gasket, and M10 nut on the rear axle in turn.
Fix the nut with the M10 wrench and then attach the wheel trim to the rear wheel.
Operation Instruction
1.
Insert the steering rod into the body
hole.
2.
Fit the Ø10 gasket on the steering
lever.
3.
Insert the hook of the steering lever
into the hole of the steering bracket.
Publicité
