Fuse:To prevent the fuse from cutting off the power supply
·The product can not be overloaded with a maximum load of 30 kg
·Do not drag anything behind this product.
·Do not let water or other liquids soak into electrical components such as wires,
batteries, etc..
·Do not arbitrarily change the line system and structure of this product
Maintenance and maintenance
·Before use, check the cable, plug, housing and other parts of the charger for
damage. When damage is found, it should be stopped until it is repaired.
·After using a period of time, lubricate the iron parts of the vehicle with a small
amount of lubricant to prevent wear and rust.
·The vehicle should be placed away from the source of the fire and avoid
long-term light. When stored, put it flat up, do not reverse and tilt; In wet
weather, cars should be parked indoors or covered with tarp.
·Vehicles should be far away from hotter objects such as stoves and heaters, and
the plastic parts may melt. Keep away from flammable materials when
charging to prevent fire.
·After use, please charge in time, charging must be operated by adults. If you do
not need to be fully charged for a long period of time, then charge at least
once a month to extend the battery life.
·Use dry soft cloth to wipe the vehicle. It is also possible to use non-waxy
furniture to polish the plastic parts instead of soft cloth to achieve the
surface finish effect. Do not wipe the plastic parts of toys with chemical
solvents. Soap and water should not be used to clean vehicles. Do not drive a
vehicle in rainy or snowy weather.
·When you stop using or placing the product, please cut off the power of the
product and all switches are pushed to the "stop" or "off" position.
·Do not use fuses that do not conform to the specifications of this product.
·Do not arbitrarily change the structure and line system of the product. The
maintenance work must be performed by professional personnel or under the
guidance of technical personnel.