Publicité
Operating Instructions
PIR Motion Sensor 360° IP54
Item no: 2918268
1 Operating Instructions for download
Use the link
www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
2 Intended use
The product is an infrared (PIR) motion sensor that connects to the mains power supply.
You can set a switch-on time to control how long the connected load stays on and adjust the
switching threshold based on ambient light levels.
The product has an IP54 ingress protection rating. The product is suitable for outdoor use.
Do not submerge the product in water.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
3 Delivery contents
■
Sensor
■
Corner mount
■
2x Screws (long)
■
2x Screws (short)
■
2x Wall plugs
■
Operating instructions
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by elec-
tric shock.
Protection class 2 (double or reinforced insulation, protective insulation).
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
5.4 Electrical installation
WARNING! Safety hazard!
The product should only be installed by people with relevant electrical knowledge and exper-
ience! *)
3
(alternatively scan the QR code) to download the
If it is not installed properly, you risk:
■
your own life
■
the life of user of the electrical device
■
severe damage to property, e.g., by fire
■
personal liability for personal injury and material damage
Always consult an electrician!
*) Technical knowledge required to perform the installation:
For the installation, the following specialist knowledge is required in particular:
■
The "Five safety rules": Disconnect from the mains; protect against accidental switch-on;
ensure there is no voltage; earth and short-circuit; cover or protect adjacent live parts
■
Use of suitable tools, measuring devices and personal protective equipment, where ne-
cessary
■
Analysis of measurement results
■
Use of electrical installation materials to meet the requirements for disconnection
■
IP protection ratings
■
Installation of electrical installation materials
■
Type of power supply (TN system, IT system, TT system) and the corresponding con-
nection criteria (classic earthing, protective earthing, necessary additional measures etc.)
If you are not a professional, do not do it yourself, have it performed by a specialist.
6 Installation
Installation consists of two parts, electrical connection and mounting.
Important:
– Risk of fatal electric shock! Electrical installation to be carried out by a licensed pro-
fessional.
– Observe the "Safety instructions", especially the "Electrical installation" warning.
6.1 Factors affecting motion detection
The passive infrared (PIR) motion sensor reacts to changes in temperature, e.g. when a per-
son or animal enters the detection area.
■
Position the sensor so the object moves across the detection area.
■
The correct installation height should be observed.
■
Do not point the sensor at radiators, lights, or objects with varying temperatures (e.g.
electronic equipment), and objects that may move due to the flow of air. This may trigger
the sensor unintentionally.
■
Do not install the product behind glass.
■
Keep the sensor away from direct sunlight.
6.2 Sensor coverage area
Installation height: 1.8 - 2.5 m
Detection radius: max. 8 m
6.3 Wiring diagram
L`
N
L
out~
In~
LOAD
N
L
6.4 Mounting
1. Remove the screw on the underside of the front cover.
2. Pull the front cover off.
3. Lift the PIR sensor up to expose the connection block.
4. Wire the sensor.
5. (For flat surfaces) Use the long screws and wall plugs to mount the sensor.
6. (For corners) Use the long screws and wall plugs to mount the corner mount to a corner
(inside or outside). Use the short screws to fix the sensor to the corner mount.
7. Lower the sensor back into the original position.
Publicité
