Publicité
Assembly Instructions
Maintenance & Storage
To enjoy years of outstanding performance from your heater,
regular basis:
• Before performing any maintenance, always disconnect propane
• Use warm soapy water for cleaning. Never use flammable or
corrosive cleaning agents.
• DO NOT use petroleum-based or abrasive cleaning products.
• DO NOT place any food on the surface of the Fire Pit.
• DO NOT eat from the surface of the Fire Pit surface.
• Blot any liquid spills with a clean, dry cloth to avoid spreading of
the spill to the rest of the table. Immediate cleaning of
into the surfaces,compared to if such stains are left for extended
periods on these surfaces.
• Cover your product with an outdoor Protective Cover when not
in use to protect it from the elements.
• Avoid extreme cold temperatures, as extreme cold
NOTE:
corroded areas and repair them promptly.
Maintenance & Storage
16
Trouble Shooting
Assembly Instructions
CAUSE
PROBLEM
Electrode and burners
are wet
Igniter battery is dead
or
Burner will
not be lit
with the
igniter.
Residue on Igniter Pin
No Gas Flow
Burner will
not light
with match
Coupling nut and
regulator not
fully connected
SOLUTION
Wipe dry with cloth.
inserted correctly in the
igniter or replace the
plastic wrap on the
battery has been
removed.
Please contact us to
request the parts.
igniter pin or
Thermocouple. If
dirty,thoroughly clean
the area.
Ignitor Cap is tightly
fitted to the spring.If
loose, please adjust the
spring accordingly.
is empty. If empty,
replace and refill. If the
empty, refer to Problem:
Sudden drop in gas flow
on the following page.
Turn the coupling nut
about one half to three
fourths a turn, until you
feel a solid stop. Do not
use tools, tighten by
hand only.
17
Publicité
