Publicité
Installation of 100-150cm
ISOFIX+Adult safety-belt or adult safety-belt only
• Before the installation, please store the harness system
of the baby car seat. Note: The baby insert, harness strap,
harness buckle, buckle pads & shoulder pads should be
stored away safely for future use.
WARNING
Do not use any load bearing contact points other than those described in the
instructions and marked in child restraint.
The belt must be routed as shown in the instructions.
• Adjust the height of the headrest to
suit your child.
• Put the shoulder belt through the shoulder.
• Place your child on the car seat and pass the
belts through the red waist belt guide. Fasten
the car belt with an audible sound "click."
• Make sure the Lap belt is stretched as low as
possible over the child's hips, and fastened
into the buckle. The shoulder belt must cross
midway between the child's shoulder and
neck.
18
Belt installation
Publicité
