Publicité
Owner's manual
• The appliance is constructed to process normal household quantities. Not for commercial
use.
• Improper use of this device may lead to injuries and damages.
• Be careful while handling the blades, they are extremely sharp.
• Keep your fingers and kitchen utensils away from the moving blades.
• Do not place this device into microwave.
1. Before assembly, clean all the parts which will have contact with food. Be extremely
careful when cleaning the blades – they are sharp and can cause injury.
2. Place the motor unit into the blending stick and turn anti-clockwise until it locks in place.
3. Plug the device into power mains socket.
4. Insert the blending stick into a container with food to be processed.
5. Press desired speed mode button to start operation.
6. Use the blender no longer than 1 minute at a time. If within that period, the desired
effect has not been reached, stop operation and wait for about 1 minute before using
the device again.
Note: please regard 1 minute of operation and 1 minute of rest as a one operation cycle.
After continuous operating the device for 5 cycles (that is 1 min. operation followed by 1
minute rest, 5 times in a row), the blender must be left for cooling for about 30 minutes.
7. Unplug the device from power supply mains.
OPERATION
13
EN
Publicité
