Télécharger Imprimer la page

Vissani VSCMWE11S2SW-10 Guide D'utilisation Et D'entretien page 9

Publicité

Operation
1
Setting The Clock
This is a 12 and 24 hour clock, and you can select which by
pressing CLOCK pad. During cooking, the current time can be
seen by touching CLOCK pad.
Example: To set the oven clock time to 8:30:
In standby mode, touch CLOCK pad once to select 12
hour clock,then press it again to choose 24- hour clock.
Use the number pads to enter the time (touch number pads
8,3,0 in order to enter 8:30).
Press CLOCK to confirm.
NOTE:
During cooking, you can check the current clock
time by pressing CLOCK button.
3
Start/Add 30 SEC
Touch START/+30 SEC once and cooking will start at full
power level immediately for 30 seconds. Touching this
button repeatedly will add 30 seconds each time.
During the time cook , you can add 30 seconds for each
push.
This function will not work for sensor cooking menus and
defrost programs.
NOTE:
During cooking (except sensor cook menus,
time defrost and weight defrost), you can add
cooking time by pressing START/+30 SEC
button. The longest time is 99 minutes and 99
seconds.
2
Setting The Kitchen Timer
In standby state or during cooking, touch TIMER pad to set
kitchen timer.
Example: How to set the timer to 30 minutes.
Touch TIMER pad once.
Use the number pads to enter time. The longest time is 99
minutes 99 seconds.
Touch START/+30 SEC pad to start.
NOTE:
4
Cooking Program
Touch the TIME COOK pad.
Use the number pad to enter desired cooking time.The
maximum number that can be entered is 99 min. 99
sec.
Touch the POWER LEVEL pad once (Default 100% power
level), and then use number buttons to set another
power level.
Press START/+30 SEC button to confirm.
Power Level Chart:
Cooking power
NOTE:
During cooking, you can check the current
cooking power level by pressing POWER LEVEL
button. Then you can use number buttons to
adjust power level.
9
Please contact 1-855-847-7264 for further assistance
The TIMER function can be used in any
cooking process. You can check the
countdown time by pressing TIMER pad,
but if STOP/CLEAR pad is pressed when
the display shows the time, the function
is cancelled.
Display
100%
PL10
90%
PL-9
80%
PL-8
70%
PL-7
60%
PL-6
50%
PL-5
40%
PL-4
30%
PL-3
20%
PL-2
10%
PL-1
00%
PL-0
HOMEDEPOT.COM

Publicité

loading

Ce manuel est également adapté pour:

1001 689 329