Operation (continued)
7
Sensor Cooking
This feature detects the increasing humidity released during cooking and automatically adjusts the cooking time for various types and
amounts of food.
□
In standby mode, press the corresponding menu button once, the display will show the food code.
For beverage, press BEVERAGE repeatedly to select servings.
□
Press START/+30 SEC button to start. In order to ensure the induction effect, the oven should blow for 45 seconds before cooking.
Sensor cook menus:
Code
SC-1
/
SC-3
/
Beverage (200 ml/cup, 1-3 cups)
SC-5
Frozen dinner (7 ~ 24 oz)
SC-6
NOTE:
After cooking for a period of time, the system will detect whether there is an error. If there is an error, for
example, the sensor short circuits or open circuits, the system will stop automatically with the display showing
"E - 5". The microwave will beep every 2 seconds until you touch the STOP/CLEAR pad.
If there is no error, the system will judge the corresponding cooking time based on the steam generated by the
food. After cooking ends, beep will sound and the display will show End.
During sensor cooking, if press STOP/CLEAR button once or open the door, the cooking program will end
automatically and the system will turn back to standby mode.
If in the longest sensor time cycle, the oven cannot judge the cooking time according to the steam produced by
the food in the microwave, the cooking will auto-end.
8
Express Cooking
□
Use this feature to program the oven to microwave food at 100% power conveniently.
□
Directly in standby mode, when you press a number button (1, 2, 3, 4, 5 or 6) once, the corresponding system direct start cooking
time starts respectively 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes and 6 minutes. The microwave oven will start to cook
at full power level.
Food
Potato (6 ~ 8 oz)
Popcorn (3.5 oz)
Pizza (5 ~ 16 oz)
Reheat (5 ~ 24 oz)
11
Please contact 1-855-847-7264 for further assistance
HOMEDEPOT.COM