Publicité
on the approval label (sticker affixed to the child seat). This approval will be invalid if
you make any changes to the child safety seat. Only the manufacturer is allowed to
make changes to the child restraint system.
TYPES OF APPROVAL BELTS TO HAVE IN THE VEHICLE
The seat is only suitable for installation in vehicles equipped with a 3-point seat belt
approved in accordance with UNECE Regulation No. 16.
Car safety belts: diagonal belt; lap belt; ISOFIX attachments – figure 9.
You can use your car seat as follows (figure 10):
In the direction of travel
Against the direction of travel
With 2-point belt
With 3-point belt
With ISOFIX attachments and safety belts
On 2,4,6 seats in the vehicle (figure 10)
On 1,3,5 seats in the vehicle (figure 10)
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING!
•
The car seat cannot be used by children under 100 cm tall.
•
Never leave the child unattended while is in the car seat.
•
Use the car seat for its intended purpose only! It is not designed to be used in
domestic conditions.
•
Do not use the child seat in the direction opposite to the direction of
movement of the front seat with an air cushion. This can result in death or
serious injury.
•
Always protect your child when it is in the car seat using the safety belt.
•
Do not leave the buckle partially closed, it should be locked when all parts are
engaged.
•
Make sure that all belts attaching the restraint system to the vehicle are as
tight as possible. Make sure that the belts that secure the child are adjusted
Yes
No
No
Yes
Yes
Yes
No
21
Publicité
