Publicité
EN
Please read this instruction carefully before installation, and refer to
it again during the installation to ensure a safe and correct
installation of the mirror.
Installation Tool
Flexible ruler
Leveling instrument
Screwdriver
Installation Instruction:
1. Make certain the wall is solid, and use the flexible ruler to
measure the center distance
between two hardy holes.
2. Use the flexible ruler to measure the center distance between two
hardy holes on the wall and mark them out with a pencil.
3. Choose the churn drill with an 6mm drill to make two holes at the
marked places, and use a ceramic drill if the wall surface is made of
ceramic tiles.
4. Use the hammer to strike the expansion rubber plug in accessory
bag into the holes on the wall and then use the screwdriver to
tighten the screws into the holes. The screw tightening is 15 mm
higher than the surface of wall to hang the mirror hook.
06
Electric drill
Hammer
Product Accessories
Mirror
Balance gasket
DE
Bitte lesen Sie diese Anleitung vor der Installation sorgfältig durch
und lesen Sie sie während der Installation erneut, um eine sichere
und korrekte Installation des Spiegels zu gewährleisten.
Installationswerkzeug
Flexibles Lineal
Nivellierinstrument
Schraubenzieher
Hammer
Wall plug
Screw
Elektrische
Bohrmaschine
07
Publicité
