Publicité
Figure 2 - Assembling adapter assembly.
3.
Repeat this for the adapter for the
other side.
4.
Attach both adapter assemblies to the
inside of the frame with the rain cover
connection facing forwards. Use the
❶
M6x20 bolt
and narrow M6 washer
❹
and tighten these securely (10 Nm).
Figure 3 - Attaching adapter assembly to frame.
Use hex wrench 4 for this.
5.
Now place the Maxi Cosi on the
adapters to
adjust the width.
6.
Once you have determined the correct
width, turn the bolts under the adapter
until they are hand tight again.
Figure 4 - Determining distance between adapter
assemblies.
PLEASE NOTE
•
The width of individual Maxi Cosis may
vary by several millimetres. To avoid
deforming the material, it is important
to adjust the width correctly.
7.
Remove the Maxi Cosi from the
adapters.
8.
Tighten the bolts securely
Use hex wrench 4 for this.
WARNING
•
If you do not use the rain cover, it is
important to close the openings on
the adapter set. This ensures that
children's fingers cannot become
trapped.
EN
(10
Nm).
7
Publicité
