4. Place the wheels (4) on the axle until they
audibly lock in place (Fig. B).
Note: in order to remove the wheels from the
axle, press the button in the middle of the wheel.
5. Fold the bracket (1a) down (Fig. C).
6. Press the buttons (1b) on both sides of the
frame and set the handle to one of the three
positions (Fig. D).
7. Slide up the safety slide (1c) on both sides
of the frame and fold up the frame. Place the
bag on the bracket (Fig. D).
8. Fasten the bag to the frame with the hook and
loop fasteners (1e) (Fig. E).
Note: the hook and loop fasteners must be
open to fold up the product.
9. Attach the mudguards (3) to the connectors
(1f) on both sides of the wheeled shopping
bag (Fig. E).
Note: make sure that the longer side of the
mudguard is facing forwards.
Use
The product has with the following features:
• two eyelets on the sides for fastening the carry
strap
• removable inner bag with thermal function
Note: the inner bag is fastened to the hook and
loop fastener in the main bag.
• shopping trolley token (6) in the main bag
(Fig. A)
• two hooks (1d) for fastening the empty prod-
uct to the front of the shopping trolley (Fig. E)
• side umbrella holder with water drainage
• strap and hook and loop fastener for an
umbrella
Storage, cleaning
When not in use, always store the product clean
and dry at room temperature.
Only clean the product with a damp cloth and
wipe dry afterwards.
IMPORTANT! Never clean the product with
harsh cleaning agents.
Disposal
Dispose of the product and packaging
materials in accordance with current
local regulations. Store the packaging
materials (foil bags, for example) out of the
reach of children. For further information about
disposal of the product no longer needed,
contact your local council. Dispose of the
product and the packaging in an environmental-
ly friendly manner.
The Recycling Code distinguishes
different materials to be returned for
recycling. The Code consists of the
recycling symbol for the recycling process and a
number that identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under continuous quality control. DELTA-SPORT
HANDELSKONTOR GmbH gives private end
customers a three-year guarantee on this product
from the date of purchase (guarantee period)
in accordance with the following provisions.
The guarantee is only valid for material and
manufacturing defects. The guarantee does not
cover parts subject to normal wear and tear that
are thus considered wear parts (e.g. batteries)
or fragile parts such as switches, rechargeable
batteries, or parts made of glass.
Claims under this guarantee are excluded if the
product has been used incorrectly, improperly,
or contrary to the intended purpose, or if the
provisions in the instructions for use were not
observed, unless the end customer proves that
a material or manufacturing defect exists that
was not caused by one of the aforementioned
circumstances.
Claims under the guarantee can only be made
within the guarantee period by presenting the
original sales receipt. Please therefore keep the
original sales receipt. The guarantee period is
not extended by any repairs carried out under
the guarantee, under statutory guarantees, or
as a gesture of goodwill. This also applies to
replaced and repaired parts.
GB
7