Publicité
ENGLISH
1. Pull the pull-pin on the console handrail to fold the console carefully. Pay attention to the cables and
Pull the pull-pin on the console handrail to fold the console carefully. Pay attention to the cables and
-- Pull the pull-pin on the console handrail to fold the console carefully.
1. Pull the pull-pin on the console handrail to fold the console carefully. Pay attention to the cables and
-- Pull the pull-pin on the console handrail to fold the console carefully.
-- Pull the pull-pin on the console handrail to fold the console carefully.
-- Pay attention to the cables and ensure that they are nog pinced.
-- Pay attention to the cables and ensure that they are nog pinced.
ensure that they are nog pinced.
-- Pay attention to the cables and ensure that they are nog pinced.
ensure that they are nog pinced.
ensure that they are nog pinced.
--unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up
--unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up
--unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up
2. Unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up.
Unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up.
--Place the machine leaning against the wall or place under a bed.
--Place the machine leaning against the wall or place under a bed.
2. Unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up.
--Place the machine leaning against the wall or place under a bed.
3. Place the machine leaning against the wall or place under a bed.
Place the machine leaning against the wall or place under a bed.
3. Place the machine leaning against the wall or place under a bed.
CAUTION: Do not allow children to touch the machine, the treadmill may fall.
CAUTION: Do not allow children to touch the machine, the treadmill may fall.
CAUTION: Do not allow children to touch the machine, the treadmill may fall.
screw on the right side of the end half a turn to the right and
the screw on the left side of the end half a turn to the right as
RUNNING BELT ADJUSTMENT
RUNNING BELT ADJUSTMENT
RUNNING BELT ADJUSTMENT
well. Repeat the process until the blockage is resolved (3).
01. Running belt deviates to left: Start the machine, set speed at 2-3 km/h without a load on the belt,
Running belt deviates to left: Start the machine, set speed at 2-3 km/h without a load on the belt,
01. Running belt deviates to left: Start the machine, set speed at 2-3 km/h without a load on the belt,
MAINTENANCE
use Allen key to turn the screw 1/4 turn (see fig. 1). Then allow the machine to run without a load for 1-2
e Allen key to turn the screw 1/4 turn (see fig. 1). Then allow the machine to run without a load for 1-2
use Allen key to turn the screw 1/4 turn (see fig. 1). Then allow the machine to run without a load for 1-2
minutes. Repeat process until the belt becomes central.
nutes. Repeat process until the belt becomes central.
minutes. Repeat process until the belt becomes central.
Safe and efficient use can only be achieved if the appliance is
02. Running belt deviate to right: Start the machine, set speed at 2-3 km/h without a load on the belt,
Running belt deviate to right: Start the machine, set speed at 2-3 km/h without a load on the belt,
02. Running belt deviate to right: Start the machine, set speed at 2-3 km/h without a load on the belt,
properly installed and maintained. It is your responsibility to ensure
use Allen key to turn the screw 1/4 turn (see fig. 2). Then allow the machine to run without a load for 1-2
e Allen key to turn the screw 1/4 turn (see fig. 2). Then allow the machine to run without a load for 1-2
use Allen key to turn the screw 1/4 turn (see fig. 2). Then allow the machine to run without a load for 1-2
that the appliance is maintained regularly. Parts that have been
minutes. Repeat process until the belt becomes central.
nutes. Repeat process until the belt becomes central.
minutes. Repeat process until the belt becomes central.
used and/or damaged must be replaced before the appliance is
11
11
11
used again. The appliance should only be used and stored indoors.
03. Running belt jam: If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a
Running belt jam: If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a
03. Running belt jam: If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a
Long-term exposure to weather and temperature/humidity changes
turn both left and right until the jam solved (see fig 3).
n both left and right until the jam solved (see fig 3).
turn both left and right until the jam solved (see fig 3).
can have a serious impact on the electrical components and moving
parts of the unit. Always unplug the power cord from the unit before
cleaning or servicing it.
Virtufit Totally Foldable TR-50i Treadmill
otally Foldable TR-50i Treadmill
fit Totally Foldable TR-50i Treadmill
Daily maintenance
•
Clean and remove sweat and moisture after each use.
•
Check that the unit is free of dust and dirt.
•
Do not use aggressive cleaning agents and keep the device
away from moisture.
Semi-annual maintenance
•
Inspect all bolts and nuts connected to the moving parts of the
unit. Tighten bolts and nuts as necessary and appropriate.
•
Check the mobility of moving parts and components of the unit.
Use silicone spray if necessary and appropriate.
We recommend the following:
•
Clean the unit after use.
•
Use a dry cloth to clean the control panel and the areas around
the on/off switch.
•
Use a soft, clean cloth and detergent to remove stubborn marks
and dirt from the unit.
•
Store the unit in a safe, dry place away from heat and water.
CAUTION!
•
Repairs must be carried out by a professional technician,
NL
NL
NL
EN
EN
EN
unless otherwise specified by the supplier or manufacturer.
•
To avoid slipping during exercise, the treadmill belt should
not be too loose. To avoid abrasion between the roller and
the treadmill and to ensure proper operation of the machine,
the treadmill should not be too tight. The distance between
the step and the belt can be adjusted. The distance between
the step and the belt should be 50 to 75 mm on both sides.
Cleaning
General cleaning of the unit will extend its life. Keep the appliance
clean by dusting it regularly.
Regular maintenance will prolong the life of your appliance and
prevent injuries! For more information, please visit https://www.virtufit.
nl/service/faq/
CAUTION!
Wear clean shoes to reduce the risk of soiling the
machine. At least once a year, remove the cover to remove dust.
LUBRICATING THE TREADMILL
11
11
11
The treadmill is equipped with a low-maintenance, pre-lubricated
treadmill. Wear and tear on the treadmill plays an important role in the
operation and life of the treadmill, so it should be lubricated periodically.
We recommend that you inspect the belt regularly. Contact us as soon
as you notice any damage to the treadmill.
Recommended lubrication of the treadmill
•
Low usage (less than 3 hours per week): once a year.
Medium use (3 to 5 hours per week): every six months.
•
•
Heavy use (more than 5 hours per week): every three months.
As a general rule: Lubricate if the mat appears dry. If in doubt, contact
the manufacturer. The use of Vaseline (acid-free) or silicone oil is
recommended for lubricating the treadmill.
Instruction
•
Lift the mat.
•
Apply two to three drops of silicone oil along the length of the
treadmill.
•
Turn on the treadmill and run for three minutes without
stressing the treadmill (i.e. without standing on the treadmill).
06
Publicité
