Publicité
ENGLISH
The softener should be adjusted according to the
hardness of the water in your area. Your local
Water Authority can advise you on the hardness
of the water in your area.
Adjusting salt consumption
The dishwasher is designed to allow for
adjustment in the amount of salt consumed
based on the hardness of the water used. This is
intended to optimise and customise the level of
salt consumption.
Please follow the steps below for adjustment in
salt consumption.
2. Switch on the appliance;
3. Press the Start/Pause button for more than 5
seconds to start the water softener set model
within 60 seconds after the appliance was
switched on;
4. Press the Start/Pause button to select
the proper set according to your local
environment, the sets will change in the
following sequence: H1->H2->H3->H4-
>H5->H6;
5. Press the Power button to end the set up
model.
GB-44
WATER HARDNESS
German
French
British
Mmol/l
°dH
°fH
°Clarke
0 - 5
0 - 9
0 - 6
0 - 0.94 H1-> Rapid
6 - 11
10 - 20 7 - 14 1.0 - 2.0 H2-> Glass
12 - 17 21 - 30 15 - 21 2.1 - 3.0 H3-> Glass,
18 - 22 31 - 40 22 - 28 3.1 - 4.0 H4->
23 - 34 41 - 60 29 - 42 4.1 - 6.0 H5-> 90
35 - 55 61 - 98 43 - 69 6.1 - 9.8 H6->90
ENGLISH
Water
Salt
softener level
consumption
(gram/cycle)
0
indicator
light up
9
indicators
light up
light up
12
Rapid
indicators
light up
20
90 mins
indicator
light up
30
mins, Rapid
indicators
light up
60
mins, Glass
indicators
light up
GB-45
Publicité
