Warranty Conditions - BST Pro UPA-40 Manuel D'utilisation

SPECIFICATIONS :
UPA-40 :
Power :
Outputs :
Frequency response :
Tone ( bass / treble ) :
Mute control :
Consumption :
Power supply:
Dimensions :
Weight :
Protection :
UPA-60 :
Power :
Outputs :
Frequency response :
THD :
Tone control ( bass / treble ) : +/-10dB (100Hz) / +/-10dB (15KHz)
Mute control :
Consumption :
Power supply :
Dimensions :
Weights :
Protection :
UPA-120 :
Power :
outputs :
Frequency response :
THD :
Tone control ( bass / treble ) : +/-10dB (100Hz) / +/-10dB (15KHz)
Mute control :
Consumption :
Power supply :
Dimensions :
Weight :
Protection :
Norme CE, ROHS

WARRANTY CONDITIONS

BST PRO equipment is covered by a 2years warranty on parts and labour
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by BST PRO are allowed to work on the equipment. Warranty becomes void when other service technicians open the
equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
BST PRO will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
© Copyright LOTRONIC 2012
UPA-40 / UPA-60 / UPA-120
40W
100V/70V/4-16 Ohms
80Hz – 16KHz
+/-10dB (100Hz) / +/-10dB (15KHz)
0 à 30dB
60W
220V-240V / 50Hz-60Hz
320 x 273 x 66mm
4Kg
short circuit, overload, overheat, DC output,...
60W
100V/70V/4-16 Ohms
40Hz – 18KHz
<0.1%
0 to 30dB
96W
220V / 50Hz
484 x 66 x 350mm ( rackable 19'' / 1,5U )
9,6Kg
short circuit, overload, overheat, DC output,...
120W
100V/70V/4-16 Ohms
100Hz – 18KHz
<0.1%
0 to 30dB
200W
220V / 50Hz
484 x 88 x 435mm ( rackable 19'' / 2U )
13Kg
short circuit, overload, overheat, DC output,...
Page 16